The TDS-01 blockage switch is installed on the side wall of the chute. When a blockage occurs in the chute, the accumulated material must squeeze the movable door. The displacement of the well stool will activate the travel switch, issue an alarm or stop signal. After troubleshooting, the movable door will automatically reset under the action of the pressure spring< Br/>
Structural characteristics of TDS-01 blockage switch:

The TDS-01 blockage switch uses a side pressure movable door structure. After troubleshooting, the thrust of the pressure spring causes the movable door to automatically reset and overload the micro switch contacts. It has high sensitivity and can be triggered with a force of only 0.9kg. The imported travel switch is selected in the machine, which is sensitive and reliable. The chute blockage protection device adopts a door structure spring reset. When the material causes blockage in the chute, the accumulated material gives pressure to the chute side wall, thereby activating the device When the door is pushed outward and the movable door is deflected by an angle, its control switch action sends a warning, vibration or shutdown signal. After the blockage fault is eliminated, the movable door is visually reset and restored to its original state under the action of the spring< Br/>




Technical indicators of TDS-01 blockage switch:

Action angle 5 Polar Resistance Angle 10°< Br/>
Contact capacity: 10A/250V or 480V (AC)

Shell dustproof, anti-corrosion, and rainproof< Br/>
Protection level: IP67

Number of switches: 1 normally open or 1 normally closed

(The number of switches can be increased according to user needs)

The switch can be connected in a normally open or normally closed form according to user needs
Environmental temperature: -20 to -60 ℃





TDS-01 Blocking Switch Applicable Place: This detector is used to detect blockages in the chute of the coal conveying system, and can provide alarm or shutdown signals. It can also be connected to a vibration motor to troubleshoot blockages< Br/>
Longitudinal anti tear switch EBST-Q01 belt anti tear protection device

Tear switch HFZL-K, belt longitudinal tear protection device, ZL-S, YPSL-A, belt anti tear switch

PDSL-160K/HB belt tear protection, YWDB-26G-80F, YHDL-2, YHDL-II< Br/>
SDMG-A blockage switch

GS-TB02 proximity switch

SD30-1210PA, SD30-4810KA, SD30-1210KA, SD30-2410KA, SD30-4810KB, SD30-1210KB, SD30-2410KB

Speed switch (rotation monitor) SD30-1210KA

Mechanical speed sensor, gear switch MJKN8-05BL2

Speed sensor model GTS211B-PR12

Gear speed sensor (for belt rotation speed measurement) GTS211B-PR16

Mining intrinsic safety KGX-SI speed sensor

KGS7 speed switch

KG18-GZ-K5 gear speed sensor

Speed sensor model GTS211B-PR12

SD-3 speed switch, rotary detector

Digital speed detectors ZGSJ-C, ZGSJ-S

SJ-S digital speed detector (sensor)



&Nbsp;