TCK-1P mining pouring type magnetic induction switch 85-265V
Mine hoist magnetic switchTCK series magnetic switches
1. Product trend:
1. This product adopts new technology and aviation materials, with a power consumption of only 50 milliwatts< br />2、 This product adopts circuit technology to reduce signal false alarms< br />3、 This product adopts a new technology and provides positioning, with positioning controlled within 3 millimeters. TCK series magnetic switch user manual II, principle TCK-1P mining pouring type magnetic induction switch 85-265V
TCK series magnetic switches are non mechanical contact magnetic proximity switches. It consists of magnetic sensors, electronic circuits, and output switches. When the permanent magnet of the magnetic detection body enters the induction area of the TCK switch magnetic sensor, relying on the magnetic field, the TCK switch operates and outputs a switch signal. The output signal reflects the position and movement direction of the detection body, and serves as a stroke control signal for the control system. The TCK series magnetic switches come in two types: universal and type, with four types of products: the TCK-1 magnetic switch; TCK-2 magnetic switch; TCK-3 and TCK-4 retaining magnetic switches. The TCK-1 magnetic switch operates for 2 seconds when an external S-pole magnetic field acts on the magnetic sensor. When in a stationary state, it is in a transition state, loses the magnetic field effect, and automatically resets. Similar to general mechanical instantaneous action button switches, press to switch and release to automatically reset. TCK-2 magnetic switch, capable of identifying the direction of magnetic field movement. When the magnetic sensor detects that the external magnetic field in the N-S pole direction has crossed zero, the switch operates and switches for 2 seconds. When the zero crossing point is stationary, it is in a transition state and loses the effect of the external magnetic field, automatically resetting. The S-N pole direction magnetic field does not convert when crossing zero. The TCK-3 and TCK-4 types of retaining magnetic switches have different magnetic field forms of action. The TCK-3 type holding magnetic switch has two states that can be held. When the external S-pole magnetic field acts on the magnetic sensor from bottom to top, the switch switching contact is connected to the upper end, and the indicator red light is on, which is maintained. Even if the external magnetic field is lost, the switch is powered on or powered off, it still maintains this state. When an S-pole magnetic field acts on the magnetic sensor from top to bottom, the switching contact is connected to the lower end, indicating a green light, and it remains in this state until the next bottom-up action. The S-pole magnetic field acts up and down on a type 3 magnetic switch, which can switch and maintain various states, similar to using force to move a mechanical button switch up and down. TCK-4 type holding magnetic switch. When the magnetic sensor detects a zero crossing of the N-S pole direction magnetic field in the external magnetic field, the switch's switching contact is connected to the upper end, and the indicator red light is on. This state is maintained. When the magnetic field in the S-N direction of the external magnetic field passes zero, the switch switching contact is connected to the lower end, indicating a green light and maintaining this state. The TCK-4 magnetic switch has accurate narrow window hole magnetic field zero crossing conversion characteristics and positioning accuracy. The schematic diagram of TCK magnetic switch is shown in Figure 1. They use sensitive and reliable magnetic sensors and microelectronic devices, some of which have high magnetic sensitivity, high resolution, and wide response frequency. The circuit design adopts redundant structure and technology, and adopts a switching power supply with a power supply voltage of 50-60Hz; 85-265VAC. All circuits are cured with epoxy resin inside cast aluminum or cast copper switch shells, fully sealed, waterproof, and resistant to impact. Due to the comprehensive use of a series of design and process technologies, TCK magnetic switches have achieved high technical indicators and performance, and are suitable for various mines. There are two methods to use TCK magnetic switches on single rope and multi rope hoists in mines without maintenance: permanent magnet magnetic field source method and wire rope magnetic field source method. Both of these uses directly detect the actual position of the lifting container. Both methods can be used simultaneously, combined with electrical control equipment, to ensure accurate operation of the hoist. This explanation mainly introduces these two usage methods. TCK-1P Freight Description Logistics: SF Express, Debon Logistics. Destination: III. Product Model Specifications and Structure TCK Series Magnetic Switch Product Model Specifications& nbsp;        Table 1 Name& nbsp; Scale type& nbsp; Power supply voltage output mode universal magnetic switch TCK-1PTCK-2P85V~265V two sets of conversion electromagnetic relay contacts universal holding type; Magnetic switch TCK-3PTCK-4P magnetic switch TCK-1TTCK-2T85V~153V, two sets of switching electromagnetic relay contacts move upwards. When installing TCK-3 magnetic switch, attention should be paid to the upward direction of the prefix (for example, the upper and lower TCK and the bottom of the prefix are downward, and the top of the prefix is upward. When the movement direction is downward, it is called upward movement when the bottom of the prefix moves towards the top of the prefix, and vice versa, it is called downward movement). 4、 Product Service Index (1) Reliability: If there is any damage caused by non-human or mechanical reasons within six months from the date of purchase, please send the damaged magnetic switch device back to the company and the company will provide a free replacement! (2) Service: The company has * logistics transportation. For users who purchase TCK series magnetic switches from our company, the entire province will receive the goods on the second day from the date of purchase, with a delay of 2 days! For users with requirements, the company can provide customization! (3) For old users who use TCK series magnetic switches and peer KGE1 and TK series magnetic switches, as long as the damaged magnetic switch is returned to the company, the company will give a 10% discount! Proximity switch CJK-1Z-KB CJK-2Z-KB、CJK-3Z-KB、CJK-4Z-KB、CJK-5Z-KB、CJK-32-KB、KSC02-1、KSC02-2、KSC02A-1、KSC02A-2、KSC02-0.1/220、KSC02A、KSC02B、CJK-1Z/T、CJK-1Z-K/T、CJK-3Z-K/T、CJK-4Z-K/T CJK-5Z-K/T 、CKG-3Z、CJK-32-K/T、FBK-1、FBK-2、FBK-3、BGK-II，TCK-1P、TCK-1T