The parking switch KGE1-1AP magnetic switch serves as a signal for the cage to be in place and an indicator of the lifting degree and degree. Its application is very extensive, and when used in conjunction with corresponding magnets, it can sense the detected object at 250mm, 360mm, and 500mm. This product has a very high positioning and a very long sensing distance, making it an excellent choice among similar products and can be used as a product. Various types of magnetic proximity switches can also be customized according to user needs, with sensitivity, stability, and points with long sensing distances; It is a product with good external performance. The commonly used alias for the KGE1 series mining sealed magnetic induction switch is the KGE1 wellbore switch;, KGE wellbore switch, KGE1 in position switch, KGE1 in position switch, KGE1 filling switch, KGE filling switch, etc. Zhuoxin KGE series universal and proximity magnetic switches, as well as KGE-2, KGE-3, and KGE-4 magnetic switches. Our company is a magnetic switch with accuracy, sensitivity, and polarity of unipolar magnetic sensors. We also have independent intellectual property rights in this technology. The KGE series magnetic switch can replace the KG1010 series magnetic switch, as well as the KYCJ series magnetic switch, CY series magnetic switch, CJK series magnetic switch, and KSA series magnetic switch. With the magnetic directional positioning function that these magnetic switches do not have, it is a revolutionary progress in traditional magnetic sensors< Performance parameters of parking switch KGE1-1AP magnetic switch: Contact parameters: 127V 2A Power supply voltage: 110V (&plum; 10), 50Hz Induction magnetic field strength: 10GS Induction distance: 250-500mm Speed response: Can meet a speed response of 30M/S. Contact number: Two sets of normally open and normally closed points Working times: The service life of the contacts can reach 100000 times. This product uses weak magnetic sensors and microelectronic devices, with some magnetic sensitivity, resolution, and wide response frequency. The circuit design adopts technology. There are two types of output: AC solid state switch (AC SSR) and electromagnetic relay (EMR) contact, with a large output switch capacity. The system design adopts reliable technology, with two sets of circuits for each function, connected in parallel. As long as the switch does not fail at the same time, it can work normally. Naming convention:&miot; KGE1-1 represents a set of contacts, namely 5-core wire (1 set normally open, 1 set normally closed)&miot; KGE1-2 represents two sets of contacts, namely 8-core wires (2 sets of normally open and 2 sets of normally closed).
The KGE1 series mining sealed magnetic switch is a non-contact magnetic proximity switch composed of magnetic sensors, electronic circuits, and output switches. When the permanent magnet of the magnetic detection body enters the area of the magnetic sensor, the switch action of KGE1 relies on the magnetic field to output a switch signal, which reflects the position and direction of the detection body. This signal can be used as the travel position signal of the control system. Adopting fault-tolerant hot backup and anti-interference technology, it has achieved relatively high technical indicators and performance, suitable for mines with relatively fixed lifting containers. For the above, it is waterproof, anti impact, and can work reliably in the mine shaft without maintenance. It can be used in conjunction with various automatic electrical control equipment, providing corresponding signals for acceleration, deceleration, and positioning for mining electrical control equipment. Thus improving the automation and positioning of electronic control< Product point: 1. The circuit design of this product adopts technology to reduce signal false alarms and false alarms. 2. This product adopts a new technology and provides precise positioning, which is controlled within 3 millimeters. 3. This product adopts new technology and has a high power consumption of only 50 milliwatts. 4. This product has strong capabilities, excellent waterproof performance, long action distance, and can withstand temperature, making it suitable for certain situations with relatively high requirements. Shandong Zhuoxin Machinery Co., Ltd. adheres to the principle of "; To survive with integrity, to develop with innovation, to guide the market, to focus on technological innovation, to promote efficiency through management, to win the market, and to win reputation through service; Our corporate philosophy is to work together with new and old customers to achieve a better tomorrow. Turn customer wishes into reality. If you have any questions about the company and products, please feel free to contact me at any time. There are two types of KGE series magnetic switches:

* type is unipolar: magnetic switches have an effect on the S pole of the magnet and no effect on the N pole, and this type of magnetic switch has strong capabilities; At the same time, unipolar magnetic switches can affect the magnetic switch after cage magnetization, which cannot be achieved by bipolar magnetic switches. This type of magnetic switch is more effective< The second type is bipolar: the magnetic switch has an S effect on the magnetBoth N-poles have an effect. However, for the case where the cage is magnetized, bipolar magnetic switches cannot be used well, often causing inaccurate alignment, signal errors, and making it difficult for users to use. This type of magnetic switch is relatively expensive< In general, unipolar magnetic switches are widely used on site due to their strong capabilities, while bipolar magnetic switches are less commonly used because they are easily affected by cage magnetization. In general, the on-site use of unipolar magnetic switches is relatively widespread because of their powerful capabilities. Bipolar magnetic switches are relatively less commonly used because they are easily affected by cage magnetization<

Product structure:

The sensor is installed on the switch end face, and all circuits are cured with epoxy resin inside the switch housing, leading out an eight core cable.
. On one side of the switch housing is a nameplate, and on the other side are two light-emitting diodes that display the switch status and light up when the switch is activated. The universal type is aluminum casing, while the type is copper casing or stainless steel casing. The main indicators for judging the performance and quality of magnetic switches are: 1. Product appearance: The appearance should be designed to be beautiful, clean, and the surface of the sealed colloid should be flat and shiny. 2. Use connecting cables: Check whether the wires inside the connecting cables are copper wires or tin plated wires. Tin plated wires have much better performance than copper wires and are also more expensive (10 core cables). Generally, cheap copper core wires are used to save costs. 3. Reaction of magnetic switch to magnet: When the magnetic switch is used in combination with TS250 magnet, the interaction between the magnet and the magnetic switch is 245mm~255mm. Products larger than 260mm and smaller than 240mm are not qualified. 4. The influence of geomagnetism on magnetic switches: A good magnetic switch needs to have good capabilities, and one of the main indicators for judgment is the influence of geomagnetism on magnetic switches. The testing method is as follows: using the TS250 magnet as an example, point the head of the magnetic switch towards the geographical south and geographical north respectively, and then align the S-pole row of the TS250 magnet with the head of the magnetic switch for testing; In both cases, the large distance between the magnetic switch and the TS250 magnet should be within the range of (245mm, 255mm), with an interval of 10mm. The shorter the interval, the smaller the influence of geomagnetism, and in good cases, the interval is around 5mm. If the interval is greater than 15mm under the influence of geomagnetism, it is not a qualified and good product. 5. Unipolar magnetic switches have a positioning window of *. The establishment of a positioning window can significantly improve the positioning of the magnetic switch on the cage. The discrimination method for positioning window: When a magnet approaches the magnetic switch from far to near, the distance between the magnet and the magnetic switch is represented by L when L> At 255mm, the magnetic switch does not operate, and at 100mm< L<255mm， The magnetic switch is in the active state when L< 100mm magnetic switch in non operating state; This can control the installation position on site and improve the positioning of the magnetic switch. So when installing the magnetic switch, the distance between the magnet and the magnetic switch should be (120mm, 220mm)
Our company has a full range of mining magnetic switches, welcome to purchase. If the user requires further detection distance or requirements, please inform us before placing an order, and we will adjust the design according to the user's needs. TCK-1, TCK-2, TCK-3, TCK-4 magnetic switches KGE1-1T, KGE1-1P, KEG1-1AP sealed magnetic switch proximity switch; Hall switch; Phase switch; HB-K-M8; HB-K-M12 contactless switch contactless transistor proximity switch JKS-J-11 magnetic memory switch. 21 magnetic memory switch 31 magnetic memory switch;