Feedback magnetic switch FJK-G6Z1-TLY-LED with mounting bracket Feedback magnetic switch FJK-G6Z1-TLY-LED with mounting bracket diagram HANGRONG/Zhuoxin, also known as valve position feedback device, can adapt to harsh environments, waterproof, moisture-proof. Reliable operation in situations with high levels of dust. The feedback switch FJK-G6Z1-TLY-LE with mounting bracket adopts a magnetic excitation mutual control method to collect the conduction or disconnection of the capture unit. It can accurately detect the working status, trajectory points, and position quantities of equipment in the automatic control system. The contact point of this mutual control technology capture unit will still have a working state maintenance function (over travel maintenance function) after being connected or disconnected. Its breakthrough point is to make up for the shortcomings of mechanical, micro moving, proximity, and infrared travel switches used before, which require the connection point to be in place and can only be connected or disconnected. Performance characteristics: 1. This product adopts a magnetic excitation mutual control method to collect the conduction or disconnection of the contact points of the capture unit, without mechanical collision, so it has no wear, simple structure, convenient installation and debugging, and maintenance is less than 95% of mechanical travel switches (mechanical, micro, proximity, infrared), reducing the labor intensity of maintenance. 2. The chipset mutual control technology used in this product ensures that the contacts of the capture unit will still have a working state maintenance function (over travel maintenance function) after being connected or disconnected. Its breakthrough point is to make up for the shortcomings of the mechanical, micro moving, proximity, and infrared travel switches that were previously used, which required accurate installation of the contacts to be connected or disconnected. 3. This product is a passive product and does not require an additional power supply to function. It is also a dry contact, without voltage reduction, without loss, and can be directly connected in series to the circuit for convenient wiring. 4. This product has three synchronicities, namely, the LE reality carried by the product is synchronized with the local control cabinet indicator light, synchronized with the computer window instructions in the control room, and synchronized with the internal contacts connected or disconnected* Even if the LE light on the product itself is damaged, its internal contacts will still work. 5. LED display, convenient and intuitive, allowing for remote viewing of device operation status. 6. The capture unit adopts a sealed structure, which is waterproof, dustproof, and has strong capabilities, suitable for various harsh environments. Technical parameters: 1. Working voltage C12-250V, AC12-250V2, working current> 200mA<= 1A, if greater than 1A, can be made separately. 3. Working temperature -40 degrees Celsius+150 degrees Celsius 4, small position resolution of 3mm 5, contact fatigue strength greater than 200000 times (contact on/off times) travel switch FJK-W150-MTG horse head thermoelectric travel switch and feedback device electric induction switch FJK-W150-TLZXFJK-W150-LE-TBJ& FJK-W150-MCBC-LE W150-B/IP66
Position switch W150-SBH-LE magnetic switch FJK-TL-LEDFJK-P-LED valve position signal reverse device direct stroke magnetic switch FJK-G6Z2-165NH-LED feedback switch FJK-G6Z1-TLY-LE with mounting bracket