C25315-B39-A1 wellbore magnetic switch anti impact waterproof product description: It consists of a magnetic sensor, electronic circuit, and output switch. When the magnetic field enters the area of the magnetic sensor, the switch operates and outputs a switch signal, reflecting the detection position and movement direction, as the stroke position signal of the control system. Adopting fault-tolerant hot backup and technology, it has achieved high technical indicators and performance, suitable for mines with relatively fixed lifting containers. It is resistant to impact, waterproof, and can work reliably in mine shafts without maintenance. C25315-B39-A1 shaft magnetic switch anti impact waterproof installation coal mine hoist shaft switch. This usage is to fix the permanent magnet on the side wall of the lifting container, and install the magnetic switch on the designated position of the shaft channel beam, wellhead, or mast, so that the switch end face sensor runs up and down the track space facing the magnet. During the lifting process, when the magnet on the container reaches the magnetic switch position, the switch acts and sends out signals such as deceleration and parking. The parameter wellbore switch is a magnetic proximity switch mainly used in mining and industry. Used for underground mine tunnels and installation on the ground, it may pose a risk to mine gas and/or coal dust. Group 2: Used in a field that may endanger a potentially sexual atmosphere. Template information: Type, technical data: C25315-A39-A&hellip-& .. 230 V Communication 1; a / 30 vaC25315-A39-A1C25315-A39-A2C25315-A39-A4C25315-A39-A5C25315-B39-A1C25315-B39-A2C25315-B39-A4C25315-B39-A5V24584-G9-A4V24584-G9-A5V24584-G9-A6BI10-M30-AZ3X/S90 3M、BI10-M30-AZ3X/S90 4M、BI10-M30-AZ3X/S90 6M、BI10-M30-AZ3X/S90 8M、BI10-M30-RZ3X、BI10-M30-RZ3X 15M、BI10-M30-RZ3X/S90、BI10-G30-AN6X、BI10-G30-AP6X、BI10-G30-AZ3X、