Guangxi Guilin Zhuoxin Plastic Shell VL27-W10X Magnetic Switch Manufacturer Magnetic Switch Principle Magnetic switch is a type of switch element that uses magnetic field signals to control. It has no magnetic disconnection and can be used to detect circuit or mechanical movement status. Another type of magnetic switch is called proximity switch, door magnetic switch, or induction switch in the market. It has a well opened mold and a plastic shell with a size. The reed tube is sealed inside the black shell, and the wire is led out. The other half of the plastic shell with a magnet is fixed at the other end. When the magnet approaches the switch with a wire, it sends a switch signal. The difference between magnetic switches with contacts and without contacts: A magnetic switch with contacts refers to a switch with a reed tube (reed tube) inside the switch, which has two contacts. Under a certain magnetic field strength, these two contacts will come into contact (this is the contact point), and when the magnetic field weakens or disappears, these two contacts will separate. This type of magnetic switch with a reed tube is a magnetic switch with contacts. So a contactless magnetic switch is a magnetic switch that does not have a reed switch and is composed of a magnetic resistor and a circuit inside. Technical parameters of magnetic switches Rated current: 100m (A) Rated voltage: AC/C5-240 (V) Application range: Used to control the operation of cylinders Equipped with cylinders; Sa  tn series cylinder operating voltage range: c5v~240v, ac; 5v~240v operating current range: c5-50ma, ac5-40ma reaction time: 0.3ms Shock resistance: 10-50 (Hz) Operating temperature: 0-60 degrees Celsius Protection level: ip-67 Indicator light: le Wire length: 2m Life:≥ The cylinder Satn is equipped for 5 million cycles. Guangxi Guilin Zhuoxin Plastic Shell VL27-W10X Magnetic Switch Manufacturer Shandong Zhuoxin Machinery Co., Ltd. has absorbed the technology of the 1990s and improved and launched new products in accordance with the practice and requirements of users for many years. Various models, internal functions, and appearance designs are consistent with the original products, but only about 10% can be directly applied to the products. Pull rope switch model: HEN005 AC/C20V
Slipping switch 60-23P 220V 3A
Emergency stop pull rope switch - KLT2-1
Bidirectional pull rope switch JLK3S-100
Two stage anti deviation switch JPK1S
Slipping detection device H-F
Longitudinal tear detection protection device JSB/GZS-C - Ⅰ
Chute blockage LK-1
Anti blocking device FBS-1
Intelligent pull rope switch/S135.T2/1
Bidirectional pull rope switch SLSFT2- Ⅱ 400V
Pull rope switch EXKLT2-P-II
Stall switch EXLM-P-X
Flow channel blockage switch EXH-P-III
Electric whistle B1-220V