The proximity switch HCH-M14-3T-HL used in the repair shop is from Shandong Zhuoxin Company, with a one-year warranty. Technical parameters: 1. Body material: A B.S2、 Filler: Epoxy3, high-power: 10W4, large switching voltage: 100 VDC5, large switching current: 0.6, small breakdown voltage: 220 VDC7, large load current: 1.0A8, large grounding resistance: 100 mΩ 9. Small insulation resistance: 108Ω 10. Release time: 0.1 ms Max11, induction time: 0.4 ms Max& nbsp; Wiring instructions: 1) There is a difference between two wire and three wire proximity switches. Three wire proximity switches are further divided into NPN and PNP types, and their wiring is different. 2) The wiring of the two wire proximity switch is relatively simple. The proximity switch is connected in series with the load and then connected to the power supply. 3) Wiring of the three wire proximity switch: connect the red (brown) wire to the positive end of the power supply; Connect the blue wire to the 0V end of the power supply; The yellow (black) line represents the signal and should be connected to the load. The other end of the load is connected as follows: for NPN type proximity switches, they should be connected to the positive end of the power supply; For PNP type proximity switches, they should be connected to the 0V end of the power supply. 4) The load of proximity switches can be signal lights, relay coils, or digital input modules of programmable logic controllers (PLCs). 5) Special attention should be paid to the type selection of the three wire proximity switch connected to the PLC digital input module. PLC digital input modules can generally be divided into two types: one type has a common input terminal that is the negative pole of the power supply, and the current flows out from the input module. In this case, NPN type proximity switches must be selected; Another type of common input terminal is the positive pole of the power supply, and the current flows into the input module. At this time, it is necessary to choose a PNP type proximity switch. Don't make the wrong choice. 6) The two wire proximity switch is limited by working conditions, and when conducting, the switch itself generates a certain voltage drop. When cutting off, there is also a certain amount of residual current flowing through. Therefore, consideration should be given when selecting it. Although the three wire proximity switch has an additional wire, it is not affected by adverse factors such as residual current and works more reliably. 7) Some manufacturers will approach the switch's&quo; Normally open; And&quo; Normally Closed; If the signal is simultaneously led out or other functions are added, please wire according to the product manual. Proximity Switch HCH-M14-3T-HL Position Control Switch SD-FJK-SBYH-ZXQ Valve Feedback Device SD-FJK-HX1DHH
Travel Switch Electromagnetic FJK-LXJ-W150-KLQJ-NKK AC220V 10A
Magnetic Induction Switch FJK-TL-XL-LED
Limit Switch FJK-PPGDMTH
Travel Switch FJK-W150-L
Travel Switch FJK-W150-YQL
FJK-W150CYDES Travel Switch
FJK Valve signal feedback device G682110N bidirectional rope switch; BALUFU BLF-LS-11   Anti roll switch WT-GJ-1 set of 10&
Bidirectional pull rope switch JNL-1V set 30 & nbsp;  Runaway switch JNL-OZ1& nbsp;  Magnetic memory switch FJK-SJRFPZS mounting bracket KHJ-2L/2B rope switch
Runaway switch J-2L/M photoelectric switch GHWDE-A-A15 10-30DC, sensing distance 5-10m, sound and light alarm LEGH-220FK: 220VAC 4W& nbsp;