NCB10-30GM40-NO Embedded Proximity Switch Product Description: Inductive proximity switches are divided into embedable (embedded) and non embedable (non embedded) types according to their installation methods. Buried type refers to the sensor head being flat, while non buried type refers to the sensor head having protrusions. The difference between embedded type is as follows: it can be embedded for installation, and the detection surface and surrounding metal can be flush without affecting the performance of the proximity switch; The detection distance is relatively short. Non embedded installation is not allowed, and the detection surface and surrounding metal cannot be flush. There must be a certain amount of space left, otherwise it will affect the performance of the proximity switch; The relative detection distance is relatively long. The periphery of the proximity switch generally has metal threads, and the embedded sensing head is fully enclosed in the metal threads; Non embedded means that the sensing head will expose the metal threads. Mainly to meet installation requirements. If the detected object is tightly attached to the surface, an embedded method can be used; If the object is not detected to be suspended, a non buried type can be used. NCB10-30GM40-NO buried proximity switch generally has two installation methods for proximity switches: flush installation and non flush installation; Flush installation: The proximity switch head can be installed flush with the metal mounting bracket; Non flush installation: The head of the proximity switch cannot be installed flush with the metal mounting bracket. Proximity switches that can be installed flush can also be installed non flush, but non flush installed proximity switches cannot be installed flush. This is because the proximity switch head that can be installed flush has a shield, and when installed flush, it cannot detect the metal mounting bracket, while the proximity switch that is not installed flush does not. Some products of Zhuoxin Company: INCHI-CMS/D1B permanent magnet collision safety door device
Proximity switch XNFY50-M18-EW7/IP65
High temperature limit switch 1LS-J503H
Longitudinal tear switch HZ-ZSE-220
Stall controller BPC/PW-3-200
Speed monitoring display NE9011 power supply AC 220V, suitable for both electromagnetic and eddy current probes, output 4-20mA
< Travel switch FPKG-A& Proximity switch BF1-5830< Magnetic steel KY35A-6_ZTK/P2 (A)
Inductive proximity switch Im18N-08-NO NPN G-TEK 10-30V/DC 10-30V/DCV