Mining sealed magnetic proximity switch KSC1010G-2/220. Various products from Shandong Zhuoxin Institute have a one-year warranty and packaging. Welcome to purchase! KSC1010G-1/22 and KG1010G-1/220 mining sealed magnetic proximity switches and control magnetic steel magnets. The mining sealed magnetic proximity switch is a mining sealed type with the symbol&lquo; ExmbI&rquo;。 It adopts the principle of magnetic induction. Has characteristics such as collision free and strong ability. Mainly used for detecting the position of moving objects. When the magnetic steel on the moving object passes through, the output contact of the proximity switch closes, and when it leaves, the contact opens. It is widely used in places with sexual hazards such as coal mines, chemicals, and petroleum, and is a sensor in modern automatic control systems. All kinds of products from Zhuoxinsuo have a one-year warranty and packaging. Welcome to purchase! Mining sealed magnetic proximity switch KSC1010G-2/220 Description 1. Overview The mining sealed proximity switch is an intrinsically safe structure with an internal sealing, IP57. The switch adopts the principle of magnetic induction, is collision free, has strong capabilities, and is widely used in hazardous places such as coal mines, chemical industries, and petroleum. It is a sensor in modern automatic control systems. The mining proximity switch is mainly used for detecting the position of moving objects, and this switch belongs to the memory type proximity switch. When the magnet passes through the mining proximity switch in one direction, the output contact is closed and held, and then the output contact is opened and held again through the proximity switch in the other direction. 2、 Technical parameter 1, Technical index (1) Output signal of proximity switch: When the contact is conducting, the voltage drop should not exceed 0.5V (injecting current 1A); When the contact is disconnected, the output resistance should not be less than 100KΩ (Applying a voltage of 12V DC as an example); (2) Contact form: normally open, normally closed, normally open+normally closed; (3) Action point distance: not less than 120mm; (4) Magnetic steel size: 290mm× 77mm× 48mm； (5) Magnetic induction strength of magnetic steel: 1900GS~3500GS; (6) Contact capacity: 12V, 24V, 36V, 110V, 220V/1A& nbsp; (resistive load) 2. Environmental conditions for use a) Surrounding temperature: -25~+70 ℃; b) The altitude does not exceed 2000 meters; c) When the ambient temperature is 25 ℃, the high relative humidity is 95&plum; 5；) There are methane and coal dust mixtures underground in coal mines, but there are corrosive environments that do not damage the insulation layer and strong magnetic fields. 3、 Structural features and working principle of a mining proximity switch, which uses a combination of a reed tube and a piece of magnetic steel internally, with melting point and wear-resistant properties. Sealing the reed tube and magnetic steel inside the shell can prevent impact and has strong capabilities. The magnetism of the small magnetic steel is insufficient to attract the springs inside the reed tube, and the switch remains in a normally open state. When the magnetic steel approaches the switch from far to near in one direction, the spring contact inside the reed tube is attracted. When the magnetic steel leaves, the state of the reed tube is maintained because the magnetic steel inside the switch is magnetized at the same time. When the magnetic steel approaches the switch again from the opposite direction, it is magnetized in the opposite direction, causing the magnetism to decrease, causing the reed spring to spring open due to elasticity, and the contact point to also disconnect. The KMW120G mining proximity switch is used in conjunction with KGY58 magnetic steel. The magnetic steel is directly installed on the detected moving object, and when the magnetic steel passes back and forth through the switch, it drives the switch to work. Only one magnetic steel is needed for several detection point switches on the same movement trajectory. All kinds of products from Zhuoxinsuo have a one-year warranty and packaging. Welcome to purchase& mash;&mash; Zhuoxinpai; Magnetic Proximity Switch Model KSJ-100 Parameters of Magnetic Proximity Switch; KSC02-0.1/220 magnetic proximity switch; Specification and model of KMW120G magnetic proximity switch; KHC100 Magnetic Proximity Switch Models KSC1010G-1/220, KSC1010G-2/220, KSC1010G-3/220, KSC1010G-4/220, KSC1010G-5/220, KSC1010G-1/36, KSC1010G-2/36, KSC1010G-3/36, KSC1010G-4/36, KSC1010G-5/36, KSC1010G-1-220, KSC1010G-2-220, KSC1010G-3-220, KSC1010G-4-20, KSC1010G-5-220, KSC1010G-1-36, KSC1010G-2-36, KSC1010G-4-36, KSC1010G-5-36 magnetic proximity switch model  KSC1010G-1-12, KSC1010G-2-12, KSC1010G-3-12, KSC1010G-4-12, KSC1010G-5-12, KSC1010G-1-22, KSC1010G-2-22, KSC1010G-3-22, KSC1010G-4-22, KSC1010G-5-22, KSC1010G-1-13, KSC1010G-2-13, KSC1010G-3-13, KSC1010G-4-13, KSC1010G-5-13, KSC1010G-1-23, KSC1010G-2-23, KSC1010G-3-23, KSC1010G-4-23, KSC1010G-5-23, KG1010G magnetic proximity switch model  KG1010G-1/220、KG1010G-2/220、KG1010G-3/220、KG1010G-4/220、KG1010G-5/220、KG1010G-1/36、KG1010G-2/36、KG1010G-3/36、KG1010G-4/36、KG1010G-5/36KG1010G-1-220、KG1010G-2-220、KG1010G-3-220、KG1010G-4-220、KG1010G-5-220、KG1010G-1-36、KG1010G-2-36、KG1010G-3-36、KG1010G-4-36、KG1010G-5-36KG1010G-1-12、KG1010G-2-12、KG1010G-3-12、KG1010G-4-12、KG1010G-5-12、 Magnetic proximity switch model; KG1010G-1-22、KG1010G-2-22、KG1010G-3-22、KG1010G-4-22、KG1010G-5-22、KG1010G-1-13、KG1010G-2-13、KG1010G-3-13、KG1010G-4-13、KG1010G-5-13、KG1010G-1-23、KG1010G-2-23、KG1010G-3-23、KG1010G-4-23、KG1010G-5-23、