SXSG-200 integrated sound and light alarm horn; Product Introduction: The sound and light integrated alarm is a product developed by our factory based on the actual situation of large and medium-sized cranes, ships, docks, and belt conveying equipment in the port machinery and electromechanical industry. This product has a novel appearance, and the warning light is made of the popular LED light tube, greatly increasing the service life of the light tube. This series of products has the advantages of high protection level, simple operation, small size, and easy installation. It has good waterproof, moisture-proof, impact resistant, and strong earthquake resistance performance. After practical application, multiple tone alarm prompts play an important role in coordinating work equipment alarms and protecting personal safety& The main functions and characteristics of the SXSG-200 integrated sound and light alarm horn; Alarm function. l  Easy to use, can work continuously for long periods of time. l  Integrated chip design with strong electromagnetic anti-interference performance. l  The flash core is specially made with a microcontroller, and the number of flashes per second can be determined according to customer requirements. l  Multiple combination configuration methods, easy to operate and use. l  The shell is made of aluminum alloy die cast, with a beautiful structure that can effectively resist salt spray corrosion. The special structure is designed with good waterproof, moisture-proof, and seismic functions. Main technical parameters; Application field: Application of large and medium-sized cranes, ships, and dock conveying equipment in the port machinery and electromechanical industry; Working voltage: AV220V; AC380V  DC24V l  Power frequency: 50Hz to 60Hz; Speaker power: 106dB-120dBl; Sound frequency: 800Hz (D tone); Protection level: IP56l; Working temperature: -30 ℃ -+70 ℃; Yan& nbsp;  Color: Red, Yellow, Green (for selection) Installation, Debugging, and Usage Method 1; It is necessary to check whether the rated voltage of the power supply and the sound and light alarm match. 2.   The voice and light alarm should be fixed to the installation surface with 4 M6 screws, and the installation surface should be flat and have sufficient mechanical strength. 3.   Connect the power and control wires from the stuffing box and correctly connect them according to the terminal definitions on the label. 4.   Check that the power cord and other control cables are connected correctly before starting the power supply. 5.   Rotate the volume adjustment potentiometer to perform volume adjustment operations& nbsp;   Note: Please install and use this product correctly according to the instructions in the manual;