KFP127/1A Mining Explosion proof GEJ30 Deviation Switch KFP127/1A Mining Explosion proof GEJ30 Deviation Switch KFP127/1A Mining Explosion proof GEJ30 Deviation Switch Structural Features and Working Principles
This deviation switch is a mining explosion proof structure, product&quo; I” The shell is made of Q235 steel plate welded, and the product is; II” The shell is made of cast iron, and metal components must be treated with rust and corrosion prevention. The outer wall is coated with baking paint, and the inner wall is coated with gray arc resistant paint. During the operation of the tape conveyor, the tape is prone to deviation due to various eccentric forces. Belt deviation can cause conveyor equipment to stop, scatter materials, block the frame, shorten the service life of the tape, and other consequences. Installing this deviation switch can provide protection. When the tape deviates to a certain position and the roller rotates to the action angle, it should act immediately. The normally open contact closes and the normally closed contact opens, sending a tape deviation signal and causing the system to shut down. When the action force is removed, the roller automatically returns to its original position and returns to normal immediately after passing the reset angle. The locking switch should be able to operate reliably under the following conditions:< Br/>a) Environmental temperature -10~+40 ℃& B) The average relative humidity shall not exceed 95% (at+25 ℃)< C) Atmospheric pressure: 80-106KPa& In situations where there is no significant vibration or impact< When there is an explosive mixture underground in a coal mine, but there is no corrosive gas that can damage the insulation. Main uses: GEJ30 mining explosion-proof deviation switch series (hereinafter referred to as deviation switch). This deviation switch is suitable for situations with explosive hazards such as gas and coal dust, as well as for use in non explosive ground environments such as steel plants, cement plants, power plants, ports, and docks with belt conveyors. The deviation switch is one of the main protections necessary for mining belt conveyors. In coal and various raw material transportation systems, the use of this switch can prevent the belt from deviating and causing coal spillage, leading to chaos in the transportation system& nbsp; Single platinum thermistor, WZP-621, WZP-430, WZP-420A, WZP2-430, WZP2-421, WZP2-420, WZP-420, WZC-320, WZP2-331, WZP2-321, WZP2-320, WZP-331, WZP-330, WZP-321, WZP-320, WZC-220A, WZC-230, WZC-220, WZP-221A, WZP2-231, WZP2-230 double platinum thermistors, WZP-3212A，WRE2-235T，WRNT-001，WZP-221，WZP-220，WREK、WRNK、WRCK，WREK-1314，WREK-440，WRNK-440，WZC-200，WRN-621A，WZP-24SA，WRE2-631，WRE-220，WZP-003，WZPM-101U， Electric contact pressure thermometer WTZ-288 WTQ-288，WTZ-280B-F，WTZ280、WTQ280，WTZ-280，WZPN-431，WZPN2-131，WZPN2-331，WZPN-130，WRN2-230-F，WZPK-526U，WZCN-430，WZCN-330，WZCN-130，WZCN-230，WZPN-131，WZP-431D，WZPN-430，WZPN2-130，WZPN-330，WZPN-331， Wear resistant thermocouple, WZPN-230, WZC-130-F, WZC-430-F, WZC-330-F corrosion-resistant and wear-resistant thermocouple resistance, WZC-230-F,. WZP2-431-F, WZP2-331-F, WZP2-231-F, WZP-131-F, WZP-431-F, WZP-331-F, WZP-231-F, WZP-131-F, WZP2-430-F, WZP2-330-F, WZP2-230-F, WZP2-130-F, WZP2-130-F, WZP-230-F, WZP-230-F, WZP-430-F, WZP-230-F, WZP-230-F, WZP-230-F, WZP-230-F, WZP-130-F, WZP-230-F, WZP-130-F, WZP-130-F WREN2-631, WREN-631, WRNN2-631, WRNN-631, WREN2-530, WREN-530, WRNN2-530, WRNN-530, WREN2-430, WREN2-330, WREN2-230, WREN2-130, WREN-430, WREN-330, WREN-230, WREN-130, WRNN2-430, WRNN2-330, WRNN-230, WRNN-130, WZPK-163S, WRE2-430-F, WRE2-330-F, WRE2-230-F WRE2-130-F, WRE-430-F, WRE-330-F, WRE-230-F, WRER2-01 electric constant temperature incubator: DHP-9012, DHP-9032,DHP-9052,DHP-9082,DHP-9162,DHP-9272,DHP-9050,DHP-9080,DHP-9160,DHP-9270,HH.CP-01,HH.CP-T,HH.CP-01W,HH.CP-TW,HH.CP-01CRW,HH.CP-01CRW,MGC-300H,MGC-350HP303-00, 303-1, 303-2, 303-3, 303-4, 303A-00, 303A-1, 303A-2, 303A-3, 303A-4,303AB-00,303AB-1,303AB-2,303AB-3,303AB-4,360-BS-II,420-BS-II,360-S-II,420-S-II, 500-S-II,600-S-II,360-II,420-II,500-II,600-II,350-BS,400-BS,500-BS,600-BS,300-BS-II,400-BS-II,500-BS-II,600-BS-II,300-S-II,400-S-II,500-S-II,600-S-II,300-II,400-II,500-II,600-II,101-A0-BS-II,101-0-BS-II,101-1-BS-II,101-2-BS-II,101-3-BS-II,101-4-BS-II,101-A0-S-II,101-0-S-II,101-1-S-II, 101-2-S-II, 101-3-S-II, 101-4-S-II, 101-A0-II, 101-0-II, 101-1-II, 101-2-II, 101-3-II, 101-4-II, 202-A0-BS-II,202-0-BS-II,202-1-BS-II,202-2-BS-II, 202-3-BS-II,202-4-BS-II,202-A0-S-II,202-0-S-II, 202-1-S-II, 202-2-S-II, 202-3-S-II, 202-4-S-II, 202-A0-II, 202-0-II, 202-1-II, 202-2-II, 202-3-II,202-4-II, PH-030A,PH-050A,PH-070A,PH-140A,PH-240A,GSP-9050MBE,GSP-9080MBE,GSP-9160MBE,GSP-9270MBE,BG-50,BG-80,BG-160,BG-270,HPX-9052MBE,HPX-9082MBE,HPX-9162MBE,HPX-9272MBE,BPX-52,BPX-82,BPX-162,BPX-272,DNP-9052E,DNP-9082E,DNP-9162E,DNP-9272E,DNP-9022,DNP-9052,DNP-9082,DNP-9162,DNP-9272,GNP-9050,GNP-9080, GNP-9160, GNP-9270, BPH-9042,BPH-9082, BPH-9162, BPH-9272,GHP-9050, GHP-9080, GHP-9160, GHP-9270,LRH-100CL, LRH-100CA, LRH-100CB, LRH-150CL, LRH-150CA, LRH-150CB, LRH-250CL, LRH-250CA, LRH-250CB, Experimental box: LHH-150SDP, LHH-250SDP, LHH-500SDP, LHH-1000SDP, LHH-SS, LHH-SG, LHH-SSG, LHH-150GSP, LHH-250GSP, LHH-500GSP, LHH-150GP, LHH-250GP, LHH-400GP, LYW-015, LYW-025, LYW-075, LYW-015N, LYW-025N, LYW-075N, BPH-060A, BPH-060B, BPH-120A, BPH-120B, BPH-250A, BPH-250B, BPH-250C, BPHJ-060A, BPHJ-060B, BPHJ-120A, BPHJ-120B, BPHJ-250A, BPHJ-250B, BPHJ-250C, BPHS-060A, BPHS-060B, BPHS-120A, BPHS-120B, BPHS-250A, BPHS-250B, BPHS-250C, BPHJS-060A, BPHJS-060B, BPHJS-120A, BPHJS-120B, BPHJS-250A, BPHJS-250B, BPHJS-250C, BHO-401A, BHO-402A, LXD-025, LXD-080A, LXD-080B, PH-101, PH-201, PH-301, PH-401, WG2010, 302A, SM10A, SM025, FQY010A, FQY015, FQY025, FQY050, FQY065, FQY160L,FB401A, 401A, 401AB, 401B, 402B, 151B, YS150, YW250, YG120, CTS-1, Refrigerator: LZT 20-100, LZT 20-200, LZT 20-300, LZT 20-400, LZT 30-100, LZT 30-200, LZT 30-300,LZT 40-100, LZT 40-200, LZT 40-300,BRC200,BRC400,BRC800,MRC200,MRC400,MRC800, Purification workbench: SW-CJ-1D, SW-CJ-1G, SW-CJ-2D,SW-CJ-2G, SW-CJ-1F,SW-CJ-1FD, SW-CJ-2F,SW-CJ-2FD, SW-CJ-1BU,SW-CJ-1CU, SW-CJ-1B,SW-CJ-1C, SW-CJ-1FB,SW-CJ-2FB,VS-840-1, VS-840-2,BXS-A2,BCS-A2,BJ-1CD,BJ-2CD, CJ-820, CCJ-1650, VS-1300, HS-1300, SHJ-875, SHJ-1450, VD-650, VD-850, HD-650, HD-850, SW-CJ-1D, SW-CJ-1G, SW-CJ-2D, SW-CJ-2G, SW-CJ-1F, SW-CJ-1FD, SW-CJ-2F, SW-CJ-2FD, SW-CJ-1BU, SW-CJ-1CU, SW-CJ-1B, SW-CJ-1C, SW-CJ-1FB, SW-CJ-2FB, HS-840U, HS-1300U, VS840U, VS-1300U, BCM-1000, BHC-1300IIA/B3, SW-CJ-DD, SW-CJ-2DD, SW-TFG-12, SW-TFG-15, SW-TFG-18, SW-CJ-90, FLB-1B, FLB-1A, FLB-1C, FLB-1200, FLB-2400, FLB-3600, AAS-700AS, AAS-700AR, PAU-1000, ZJ-600, ZJ-800, SW-CJ-1K, SW-CJ-2K, APB557, APB777, JC-900, JC-1200, SW-CJ-1E, SW-CJ-1ED, SW-CJ-2E, SW-CJ-2ED, SW-CJ-DA, SW-CJ-DB, far-infrared drying oven: 70-1766-3A, 766-2A, 766-1A, 766-0A, 766-3AS, 766-2AS, 766-0AS, 404-1, resistance furnace: SK2-2.5-13, SK2-2-13, SX2-2.5-10, SX2-4-10, SX2-5-10, SX2-8-10, SX2-12-10, SX2-2.5-12, SX2-5-12, SX2-10-12, SX2-4-13, SX2-6-13, SX2-8-13, SX2-10-13, SX2-8-16, SX2-12-16,XL-1,KSW-4D-11,KSW-4D-13,SXL-1002,SXL-1008, SXL-1016, SXL-1030, SXL-1208, SXL-1216, SXL-1304, SXL-1313, SX2-2.5-10N, SX2-4-10N, SX2-8-10N, SX2-12-10N, SX2-2.5-12N, SX2-5-12N, SX2-10-12N, SX2-4-13N, SX2-8-13N, SX2-8-16N, SX2-12-16N, SX2-2.5-10T, SX2-4-10T, SX2-8-10T, SX2-10-12T, Thermostatic oscillator: SHZ-A, SHZ-B,SHZ-C,THZ-92A,THZ-92B,THZ-92C,ZD-810,THZ-312,THZ-412,THZ-320,THZ-420,TQZ-312,LHZ-111,LQZ-211,ZDP-150,ZDP-250,HZP-150, HZP-250,DHZ-1102, DHZ-2102, DHZ-1112, DHZ-2112,WSZ-50A,WSZ-100A,WSZ-200A, SHY-2, SHY-3, SHY-2A, WHY-2, SHA-C, SHZ-82, THZ-82, THZ-82A, ZD-85, CHA-S, CHA-SA, ZD-2, ZD-3, ZD-4, HY-1, HY-2, HY-1A, HY-3, HY-4, HY-3A, HY-5, HY-5A, HY-6, HY-6A, HY-A, HY-B, MM-1, ZW-A, ZW-B, KS, SZ-1, TS-A, ZD-88, MM-1, MM-2, W2-100, W2-100S, W2-100SP, W2-180P, W2-180SP, W3-100SP, W5-100SP, W5-180SP, W10-100SP, W20-100SP, W50-100SP, F2HA, F5HA, F20H, F20H2A, F20H2B, F50H2A, F50H2B, F02J2B, F05J2B, F1J2B, F2J2B, F3J2B, F5J2B, F10J2B, F20J2A, F30J2A,FY20, FY50, VF20P, VF20S,