Mining anti deviation switch KBW-220P Mining anti deviation switch KBW-220P Usage and installation: The anti deviation switch can be fixed on the top or bottom of the conveyor longitudinal beam, and the action rod is about 25mm away from the edge of the belt. Usually installed on both sides of the belt at a distance of 0.3-2 meters from the head or tail. When the belt deviates, it forces the actuating rod to deviate and triggers the alarm switch. If the deviation continues, triggering another set of switches will result in a protective shutdown of the conveyor. Technical parameters of two-stage deviation switch: 1. Switch contact capacity: AC 380V 10A< br/>2、 Shell: Cast aluminum waterproof, anti-corrosion 3. Protection level: IP674. Action angle: Level 1 12 ° alarm signal, Level 2 30 ° shutdown signal; 5. Force (kg) 3. Structural characteristics of the deviation switch: The universal installation design allows the deviation detection device to be installed freely at the top or bottom position of the conveyor longitudinal beam; Closed, corrosion-resistant, and sturdy cast aluminum casing. Protection standard IP67, capable of long-term operation in harsh environments; The cover plate can be removed for maintenance without the need to remove the action lever; Imported action rod bearing, capable of operating at a speed of 4000 rpm for a long time; When the action angle is 12 °, the alarm contact will act. When the action angle is 30 °, it is the shutdown signal output special option:
1. Stainless steel cover plate screw 2, stainless steel action rod and stainless steel vertical roller 3. Optional installation bracket 4. Can increase the number of switch contacts KBW-220P mining anti deviation switch two-stage deviation switch and anti deviation switch. The deviation detector is used for conventional belt conveyors: underground, cableway support belt conveyors: ship loading and unloading systems; Stacking/reclaiming conveyor; Tilt and shuttle conveyors; Crane, excavator, boom limit: skirt feeder/conveyor: heavy-duty limit switch detects the deviation of the tape, which is an automatic warning and shutdown protection device for controlling the tape machine. Structural characteristics of the deviation switch: The universal installation design allows the deviation detection device to be freely installed at the top or bottom position of the conveyor longitudinal beam; Closed, corrosion-resistant, and sturdy cast aluminum casing. Protection standard IP67, capable of long-term operation in harsh environments; The cover plate can be removed for maintenance without the need to remove the action lever; Imported action rod bearing, capable of operating at a speed of 4000 rpm for a long time; When the action angle is 12 °, the alarm contact will act. When the action angle is 30 °, it is the output of the shutdown signal< br/>