When the stainless steel tilt switch PLR-30-SS liquid level switch PLR-30-SS liquid level switch PLR-30-SS liquid level switch is subjected to external force and deviates from the vertical position by more than 15 degrees, the metal ball contacts inside the switch act and the normally closed contacts open. After the external force is removed, the tilt switch returns to the vertical state, and the metal ball contacts close again. Using the changes in the opening and closing of the internal contacts of the tilt switch to determine the working condition of the equipment, in order to take timely measures and achieve the purpose of safety protection< Features: The tilt switch can be used alone with the probe or in conjunction with the control device. The alarm output time is adjustable, and the control device has an adjustable delay line of 0-10 seconds, which can avoid false operation of the tilt switch caused by instantaneous tilt. The normal/alarm position can be set, and there is a jumper in the control device that can set the switch to a normal or tilted state. It is sturdy and corrosion-resistant. Technical specifications: Power supply: 220 VAC± 10%, 47-62 Hz, 10W output: One DPDT contact with rated capacity of 5Amp/220 VAC or 5 Amp/28VDC, non inductive load time delay: 0-10 seconds, adjustable jumper: allows the switch to be set to normal state in vertical or tilted state LJ22A3-8-Z/EX  LJ22A3-8-Z/CY Z/CY LJ14A3-5-Z/AY LJ14A3-5-Z/BY LJ14A3-5-Z/BY LJ14A3-5-Z/CXHZB-100 Series Static Intermediate Relay; HZB-100 series static intermediate relay; 4V130-06 solenoid valve; HZS-100 series static intermediate relay; HZS100 series static intermediate relay; HZS100 series static intermediate relay; 4V210-08 solenoid valve; 4M210-08 (06) solenoid valve; 4V220-08 (06) solenoid valve; 4V230-08C, E, P solenoid valves; 4M310-10 (08) solenoid valve; 4V310-10 (08) solenoid valve; 4V320-10 (08) solenoid valve; 4V330-10C, E, P solenoid valves; 4V410-15 solenoid valve; 4V420-15 solenoid valve; 4V430-15C, E, P solenoid valves; HV-5 HBRV-187.5 Brinell hardness tester; HZB-100 series static intermediate relay; HL-12A Leeb hardness tester; JB-300B Impact Testing Machine; JB-300 impact testing machine; JB-500B Impact Testing Machine; JB-S300 Digital Impact Testing Machine