Blocked material level gauge HXTZ-NAL tilt switch probe blocked material level gauge HXTZ-NAL tilt switch probe blocked material level gauge HXTZ-NAL tilt switch probe working principle& When a vertically suspended tilt switch is subjected to external force and deviates from the vertical position by more than 15 degrees, the internal contacts of the switch act, causing the normally closed contacts to open (or the normally open contacts to close). After the external force is removed, the tilt switch returns to the vertical state, and the contacts close (or open) again. Use the changes in the opening and closing of the internal contacts of the tilt switch to determine the working condition of the equipment, so as to take timely measures to protect the equipment. Action angle& nbsp;   Approximately 17 degree contact composition& nbsp;   Normally closed contact capacity; 24VDC/220 VAC protection level& IP67 shell: cast iron structure, surface plated with nickel chromium alloy HXTZ-NAL level gauge, tilt switch hanging type tilt switch suspended in the hopper. As the input of materials increases, when the switch part tilts about 17 degrees, the switch inside the material flow will act and output contact signals. The inclined switch cast iron structure has strong wear resistance and is sturdy, and is widely used to detect the upper limit level of bulk materials (such as powder, particles, blocks) in silos or transfer chutes& nbsp; SN06Y1  SN06D1  SN06P2  SN06P  SN06N3  SN06N2  SN06N  SN05Y2  SN05Y1  SN05D2  SN05D1  SN05P3  SN05P  SN05N3  SN04Y1  SN04D2  SN04D1  SN04P3  PS17-5Y2  PS17-5Y1  PS17-5D2  PS17-5D1  PS17-5DP3  PS17-5DN3  PL08Y2  PL08Y1  PL08D2  PL08D1  PL08P3  PL08P2  PL08P  PL08N3