Explosion proof tilt switch explosion-proof type XTD-ZL explosion-proof tilt switch explosion-proof type XTD-ZL explosion-proof tilt switch explosion-proof type XTD-ZL data parameters: 1. Rated contact: 24V/220VAC/2A2, rated temperature: -20~100 ℃ (customizable 200 ℃) 3. Shell material: stainless steel 4. Cable length: 6000mm (customizable) 5. Probe length: 180mm6, total probe length: 210mm7, tail connection thread: M20× 1.5× 508. Product weight: 1.2kg; When a vertically suspended tilt switch is subjected to external force and deviates from the vertical position by more than 15 degrees, the internal contacts of the switch will act, and the normally closed contacts will open (or the normally open contacts will close). After the external force is removed, the tilt switch is approved to the vertical position, and the contacts are closed (or disconnected) again. Using the changes in the opening and closing of the internal contacts of the tilt switch of the belt conveyor 20-43 tilt blockage switch to infer the working condition of the equipment, in order to timely approve measures and defend the equipment. Voltage AC220V sensor probe connector voltage AC220V, normally closed contact, certified by ExdI, is a detection device used to detect whether there is blockage in the falling part of the conveyor belt during the conveying of loose materials, and if there is tilting during the blockage, it will sound an alarm and stop the machine. LJ30A3-10（15）-Z/BX & nbsp; LJ24A3-8（10）-J/EDZ & nbsp;LJ24A3-8（10）-Z/CY & nbsp;LJ24A3-8（10）-Z/CX & nbsp;LJ24A3-8（10）-Z/AY & nbsp;LJ24A3-8（10）-Z/AX & nbsp;LJ24A3-8（10）-Z/BY & nbsp;LJ24A3-8（10）-Z/BX & nbsp;LJ18A3-5（8）-Z/EDZ & nbsp;LJ18A3-5（8）-Z/CY & nbsp;LJ18A3-5（8）-Z/CX & nbsp;LJ18A3-5（8）-Z/DX & nbsp;LJ18A3-5（8）-Z/EX