Belt tilt switch PLR30M-G-8/s; Belt tilt switch PLR30M-G-8/s; Belt tilt switch PLR30M-G-8/s; Working principle of PLR30M-G-8/s belt tilt switch: When a vertically suspended PLR30M-G-8/s belt tilt switch is subjected to external force and deviates from the vertical position by more than 15 degrees, the internal contacts of the switch act, and the normally closed contacts open (or the normally open contacts close). After the external force is removed, the tilt switch returns to the vertical state, and the contacts close (or open) again. Use the changes in the opening and closing of the internal contacts of the tilt switch to determine the working condition of the equipment, so as to take timely measures to protect the equipment. When the PLR30M-G-8/s belt type tilt switch probe, which is vertically suspended, is subjected to external force and deviates from the vertical position by more than 17 degrees, the metal ball contact inside the tilt switch will act, and the normally closed contact will open. After the external force is removed, the tilt switch returns to the vertical state, and the metal ball contacts close again< Technical parameters of tilt switch
Standard ST-20 20-39 20-39 25, KBC-220
1. Rated contact: 24V/220VAC/2A
2. Rated temperature: -20~100 ℃ (customizable 200 ℃)
3. Shell material: stainless steel
4. Cable length: 6000mm (customizable)
5. Probe length: 180mm
6. Total probe length: 210mm
7. Tail connection thread: M20× 1.5× 50
8. Product weight: 1.2kg
ST-20P lightweight
1. Rated contact: 24V/220VAC/2A
2. Rated temperature: -20~100 ℃ (customizable 200 ℃)
3. Shell material: engineering plastic
4. Cable length: 6000mm (customizable)
5. Probe length: 195mm
6. Total probe length: 230mm
7. Tail connection thread: M20× 1.5× 50
8. Product weight: 0.7kgST tilt switch. When the tilt switch suspended vertically is subjected to external force and deviates from the vertical position by more than 15 degrees, the internal contacts of the switch will act, and the normally closed contacts will open (or the normally open contacts will close). After the external force is removed, the tilt switch returns to the vertical state, and the contacts close (or open) again. Use the changes in the opening and closing of the internal contacts of the tilt switch to determine the working condition of the equipment, so as to take timely measures to protect the equipment. LU4-16N1  LU3-10P2  LU3-10P1  LU3-10N2  LU3-10N1   JKD-J-D12  LJG5C5/20BN2  LJG5C5/20AN2  LJG5C5/22BN2  LJG5C5/22CN2  LJG5C4/20BN2  LJG5C4/20AN2  LJG5C4/22BN2  LJG5C-4/22CN2  JCW-40N